Product Overview
Different industrial environments combine extreme ambient heat, airborne dust, and continuous operation demands. A compressor body must resist thermal degradation, maintain volumetric efficiency under high intake temperatures, and allow fast on‑site service without cleanroom conditions. Hanbell’s single‑stage oil‑injected screw compressor body meets these challenges. The ground 5:6 asymmetric rotor profile minimizes internal leakage even when discharge temperatures rise, preserving high efficiency where other designs lose specific power. The oil‑injected circuit simultaneously seals, cools, and lubricates, preventing dust ingress into rotor clearances and keeping thermal stress within design limits. For maintenance, the cast iron housing uses a split end cover and a dedicated oil separator access port. Technicians can inspect rotors or replace the separator without full disassembly – critical when service occurs in high‑temperature, dusty field conditions. Rated for 50,000 hours under nominal loads, this compressor body gives Middle East customers consistent energy savings and reduced downtime, even when the thermometer passes 45°C.
Technical Specifications
| Parameters |
Technical Value |
| Model |
AB-830 |
| Drive Speed (RPM) |
3000 |
| Discharge Pressure (Bar) |
8 |
| Free Air Delivery(m3/min) |
12.47 |
| Free Air Delivery (@s.t.p)(Nm3/min) |
11.62 |
| Mass Flow Rate(kg/min) |
14.88 |
| Shaft Power(KW) |
80.6 |
| Specific Power(KW) |
6.46 |
| Oil Flow Rate(L/min) |
114.0 |
| Oil Heat Load (kW) |
65.6 |
| Dew Point Temperature(°C) |
71.9 |
| Recommended Oil Viscosity |
46 |
Key Benefits
Long service life, good stability,
High application pressure and has been used in the market for more than 15 years.
Good reputation and is benchmarked against the international brand head
About Bebaios
As a national high-tech enterprise, Bebaios Compressor, with a global reach, is committed to in-depth R&D and full-chain manufacturing in the field of energy-saving air compressors. Our product portfolio covers a full range of models, including screw compressors, permanent magnet variable frequency compressors, reciprocating piston compressors, and scroll compressors, and we also provide matching refrigerated dryers and post-processing equipment, customizing efficient and practical air system solutions for our customers.
We offer more than just equipment; we provide support. Leveraging our nationwide service network and 24/7 technical support, we promise a rapid response within 30 minutes. With our self-developed ERP system enabling precise data traceability for every machine, and on-site supervision by experienced engineers, Bebaios ensures uninterrupted production power, allowing you to focus on core business growth without worry.
FAQs
FAQs
Q1:How long does it take to arrange production?
A:Depending on the production cycle, completion is expected within 2-3 days.
Q2:How long is the warranty for your air compressors?
A:12 months.
Q3:What is the Minimum Order Quantity (MOQ)?
A:1 set.
Q4:What is the production capacity of your factory?
A:Approximately 6,000 units per month. Thank you.
Q5:Can you use our brand (OEM)?
A:Yes, we are also actively seeking agents in various countries.
